1. Components of the W14 Fastening System
The W14 rail fastening system consists of the Skl 14 tension clamp, Ss35 sleeper screw, Uls7 washer, Wfp14K gauge block, Sdu25 plastic dowel, and rail pad. The Skl 14 tension clamp provides continuous elastic clamping force to the rail. The Ss35 sleeper screw works with the Sdu25 plastic dowel to anchor the assembly, while the Uls7 washer distributes the tightening load evenly. The Wfp14K gauge block maintains the track gauge, limits lateral rail movement, and provides electrical insulation. The rail pad offers resilient support, absorbs impact, and protects the sleeper. Height adjustment pads and wear plates can also be supplied for specific track conditions.
Figure 1. Main components and installation arrangement of the W14 fastening system.
Table 1. Typical component configuration for an SKL clip rail fastening system.
2. Working Principle and Production Process
The W14 system uses sleeper screws to secure the tension clamps, washers, and gauge blocks to the concrete sleeper. After tightening, the tension clamps deform elastically and continuously press the rail foot, preventing the rail from loosening or creeping. The gauge blocks maintain the track gauge and control lateral movement, while the rail pad absorbs impact and reduces vibration. Together, these components create a reliable, resilient, and maintainable connection between the rail and sleeper.
The components are generally manufactured separately and supplied as a complete system. Metal parts typically undergo blanking, forming, heat treatment, surface treatment, and quality inspection. Plastic and elastic parts are usually produced by injection molding, compression molding, or hot pressing. Production control focuses on dimensional accuracy, mechanical and elastic properties, corrosion resistance, and electrical insulation to ensure correct assembly and long-term performance.
Table 2. SKL14 components list per set (reference product-page configuration).
|
Name |
Specification |
Qty |
Raw Material |
|
Tension Clamp |
SKL14 |
2 Pcs |
60Si2Mn |
|
Gauge Block |
Wfp 14K |
2 Pcs |
PA66+GF30% |
|
Sleeper Screw |
DHS 24x161 |
2 Pcs |
35# |
|
Plastic Dowel |
Sdu26 |
2 Pcs |
PA6 |
|
Flat Washer |
ULS6 |
2 Pcs |
Q235 |
|
Rail Pad |
175x132x7 |
1 Pc |
EVA |
Reference data reproduced from the W14 product page. Component specifications may vary by project and customer requirements.
3. Applications
The W14 fastening system is mainly used on ballasted tracks with concrete sleepers and is suitable for conventional, high-speed, and selected heavy-haul railway lines. Its clamping force, resilience, and insulation help maintain rail stability and reduce vibration and impact. By selecting suitable rail pads, gauge blocks, or auxiliary pads, the system can accommodate different rail profiles, gauge adjustment, vibration and noise reduction, and maintenance or replacement requirements.
Contact Us
Contact：Miss. Cecilia Lin/Mr. Jordon Liu
Telephone：+86 15366202830/+86 13962481343/86 51252591998
Email：info@hb-railway.com
www.hbrailwayfastening.com
Suzhou HuiBo Railway Fastener Co.,Ltd.
