Electronic product housings present a demanding combination of requirements: strong adhesion to plastic substrates, scratch and abrasion resistance, chemical and water resistance, controlled gloss or matte appearance, and compatibility with production curing equipment. Guangdong Lencolo New Material Co., Ltd., operating under the Lencolo brand, addresses these needs through its UV Spray Coatings and Topcoats product line, part of a broader portfolio that includes UV resins, UV monomers, photoinitiators, and functional additives.
Why UV Spray Coatings Matter for Consumer Electronics
UV spray coatings are used to provide decorative and protective finishes on plastic, metal, and other compatible industrial substrates. Applications explicitly covered by Lencolo include automotive interior components, consumer electronics, cosmetic packaging, decorative plastic parts, and industrial products—making this category directly relevant to electronic housing manufacturers.
The key selection requirements for this application category include substrate adhesion, leveling and surface appearance, gloss or matte finish, hardness and scratch resistance, flexibility and crack resistance, chemical and water resistance, recoatability and intercoat adhesion, and compatibility with pigments, solvents, and curing equipment. These criteria reflect the real-world performance challenges that formulators face when developing coatings for housing surfaces that must withstand daily handling, cleaning, and environmental exposure.
Product Candidates Organized by Substrate and Performance Need
Lencolo's recommended product candidates for UV spray coatings are organized according to substrate type and performance focus, reflecting the company's application-oriented selection approach rather than a one-size-fits-all recommendation.
For ABS and PC UV topcoats—common materials in electronic housings—candidates include the L-6112 series, L-6121, L-6150, L-6129, L-6117, L-6118, L-6131, L-6605, L-6606, L-6135, L-6132A, and L-6111. Candidate monomers such as TMPTA and HDDA may be incorporated where formulation compatibility permits.
Where adhesion and flexibility are priorities, Lencolo lists L-6300, L-6410, L-6129, L-6131, L-6118, L-6206C, L-6135, L-6132A, and L-6460 as candidate materials.
For basecoat/topcoat systems, relevant candidates include L-6410, L-6129, L-6131, L-8413, L-6135, L-6132A, L-6117, L-6118, L-6605, L-6601A, L-6602, L-6602A, L-6603A, L-6600A, and L-6600, with CTFA and PETA considered as candidate monomers.
For housings involving metal components or difficult-to-adhere substrates, candidates include L-8413, L-6410, L-6040, L-6135, L-6132A, L-6117, L-6600, L-6206C, L-8400C, L-6200C, and L-6390, with DPHA evaluated as a reactive monomer option.

For flexible TPU and PVC components sometimes used in electronic device accessories, candidates include L-6135, L-6132A, L-6206C, L-6200C, and L-6117-100, with IBOA considered as a reactive diluent.
A Technical, Not Assumptive, Selection Approach
Lencolo's documented selection guidance distinguishes between rigid and flexible substrate needs: for rigid plastics, the emphasis is on hardness, adhesion, and surface appearance, while for flexible substrates, the priority shifts to elongation, low cracking tendency, and adhesion after bending. For metal surfaces, pretreatment and adhesion testing are described as especially important.
This substrate-specific logic extends across Lencolo's broader capability system. The company's stated business approach is that product recommendations are based on application requirements and technical evaluation, rather than assuming one resin is suitable for every coating system. This is consistent with Lencolo's technical notes for spray coatings, which specify that resin selection should account for coating solids, spray viscosity, solvent compatibility, film thickness, flash-off conditions, and curing equipment—and that product candidates must be validated in the customer's complete formulation.
Supporting Formulation Materials and Technical Services
Beyond base resins, Lencolo's product range includes UV monomers, photoinitiators, and functional additives designed to work within compatible coating, ink, and adhesive formulations. For electronic housing projects, this means formulators can draw from a single supplier for resin, monomer, and photoinitiator combinations rather than sourcing components separately.
Lencolo also positions itself around formulation support services. These include technical product selection—recommending candidate resins, monomers, photoinitiators, and additives based on application and performance requirements; substrate compatibility support for materials such as PET, PC, PMMA, ABS, PVC, TPU, glass, metal, and wood; and curing system selection assistance for conventional UV curing, UV LED curing, and applicable specialty curing systems.
For housing manufacturers troubleshooting specific defects, Lencolo's documented troubleshooting support addresses issues such as poor adhesion, surface tackiness, incomplete curing, orange peel, cracking, poor leveling, and inadequate wear resistance—all of which are common pain points in spray-coated plastic and metal housing production.
Technical Documentation and Validation Requirements
Lencolo makes available technical data sheets and safety data sheets for its relevant products, supporting customers who need to verify chemical type, functionality, viscosity, performance characteristics, and recommended applications before committing to a formulation direction.
Importantly, Lencolo's own technical notes emphasize that final formulation suitability and performance must be confirmed by customer testing, and that recommendations do not constitute a guarantee of specific results. This disclosure reflects a transparent, technically grounded approach: rather than presenting a single resin as universally compatible with every substrate, coating method, curing wavelength, or formulation, Lencolo frames its product lists as candidate materials for evaluation.
Positioning Within a Broader Coating Materials Portfolio
Electronic housing coatings are one of several application areas Lencolo addresses alongside UV transfer coatings, UV hard coatings, vacuum metallization basecoats and topcoats, excimer UV coatings, dual-cure systems, UV printing inks, UV inkjet inks, UV adhesives, 3D printing resins, nail gels, and PVC/SPC flooring coatings. This breadth allows the company to support related housing-adjacent needs, such as decorative transfer coatings or metallized finishes, using the same underlying resin chemistries—epoxy acrylates, polyurethane acrylates, and polyester acrylates—referenced throughout its UV spray coating recommendations.
For formulators and manufacturers evaluating coating materials for electronic product housings, Lencolo's structured, substrate-and-performance-based product organization offers a starting point for narrowing candidate materials, while the company's stated emphasis on formulation testing under actual production conditions underscores the importance of validating any selected resin, monomer, or additive combination before full-scale implementation.
https://www.lencolo37.com/
Guangdong Lencolo New Material Co., Ltd.